A Step By Step Guide On Philodendron Erubescens Propagation

Philodendron erubescens is a highly valued exotic plant that features this charming and colored foliage. Philodendron erubescens propagation may take a little time. But in around a month or thereabout, the cutting should form a good root system if you can provide the right care and attention.

The plant of philodendron erubescens can be propagated by cutting and division. The plant can grow and attain a height of about 36 inches as a houseplant. Then in the wild, the plant can grow much bigger.

Philodendron erubescens propagation steps will be outlined in this post so continue reading for more info on this.

Philodendron Erubescens Propagation: Step By Step Guide

Philodendron erubescens propagation can be done in different ways such as stem cuttings, division, seeds, and air layering. So, let’s explore these methods:

Propagation By Stem Cuttings

Philodendron erubescens propagation by stem cutting is pretty easy and quick and it usually results in a good success rate.  Here are the steps to follow to propagate Philodendron erubescens by stem cutting.

Philodendron Erubescens Propagation - By Stem Cuttings

Step 1: Propagate philodendron erubescens in the right season and this is during spring or early summer. This period is when the weather is slightly warm and it helps propagate the plant.

Step 2: Choose the stems that are healthy and in good shape. The stems should have at least two or three nodes.

Step 3: Next, with the help of a pruning shear, cut three to seven inches of the stem.

Step 4: Then root the stem by either placing them in water or in the soil. This setup should be placed in a warm place with indirect light.

Step 5: In about 20 days, you should notice the root develops. Then in about a month, the shoots would have also developed.

Check Out Troubleshooting Overwatered String Of Hearts

Propagation By Division

Philodendron erubescens propagation can be done by division. Follow the steps below to learn how:

Step 1: Select a healthy and matured part of the mother plant. Then carefully remove it from the pot and make sure you clear enough soil from the bottom so you can see the root system.

Step 2: Using a garden shear, snip a section of the plant and keep intact a section of the developed roots in both. Note that the section that was cut out needs to have at least two shoots.

General Hydroponics Rapid Rooter Plant Starters, 50 Plugs

Step 3: Next, the cutout section should be transplanted into the appropriate container. Then the mother plant should be repotted.

Step 4: The two sets of plants should be placed in warm indirect sunlight as this will aid in their root development.

Propagation By Seeds

Although philodendron erubescens propagation by seed may take longer compared to stem cutting; a higher success rate can still be achieved if good-quality seeds are used.

Step 1: the plant of philodendron erubescens doesn’t really rewire soaking before sowing. Just place the seeds directly half an inch into the soil.

Step 2: then cover the seeds lightly and spray water to maintain moist soil.

Step 3: you should begin to notice the seeds germinating in about 8 weeks. Note that the appropriate temperature for germination needs to be between 6 degrees Fahrenheit and 73 degrees Fahrenheit.

Step 4: repotting should be done after 16 weeks once the root has established themselves into the soil.

Propagation By Air Layering

This air layering method works well when the blushing of the philodendron erubescens has attained maturity and has a thick stem. So, below are the steps to follow to go about this:

Step 1: Get a matured philodendron erubescens stem and cut an angle halfway through.

Step 2: Next, a piece of plastic needs to be carefully inserted into the angular cut and wrap it with a layer of moss. With the help of a plastic wrap, cover it and fasten it with a string and leave the setup undisturbed.

Propagation By Air Layering

Step 3: After two weeks, you should find tiny tender roots developing in the moss. Then in another week, you should begin to notice some healthy roots.

Step 4: so, when the strong roots have developed, take out the plastic wrap and place the rooted moss into the soil directly.

Caring For Philodendron Erubescens

Philodendron erubescens plant the right care so they can flourish optimally. So, here are some care tips to follow:

  • Light: Philodendron erubescens prefers indirect bright light. Preferably, position the plant indoors in the east-facing window that can provide morning light. But ensure the sun’s rays aren’t touching the leaves.
  • Water: watering should be done only when the surface of the soil is dry. The plant doesn’t do well with overwatered soil.
  • Soil: the majority of the standard potting mix is fine for this plant to grow in. However, philodendron erubescens usually do well in loamy nutrient-filled, and fast-draining soil.
  • Temperature and Humidity: the ideal temperature for philodendron erubescens to flourish falls between 55 to 80 degrees Fahrenheit. Also, a regular room temperature is excellent for the plant to grow. Also, this plant does well with moisture heat. But the plant can still tolerate shorter periods of cold if the plant is already well established.
  • Fertilizer: use a regular houseplant fertilizer to feed your plant and fertilizer during their growing season (during summer and spring). Then during fall or winter, fertilization can be reduced to once every other month.

Conclusion – Philodendron Erubescens Propagation

Philodendron erubescens is a nice plant to have as a houseplant, and propagation is a good option to grow and multiply your plant. The plant can be propagated by stem cutting, air layering, seed, and division and we’ve outlined how to go about these methods in this post.

FAQ’s

Can you propagate philodendron from a leaf?

Using only leaves to propagate philodendron may not produce good results. To successfully propagate philodendron, you will need to cut the vine where leaves are present. The cutting you will be making needs to have a node on the vine close to a leaf and there can even be an aerial root already growing.

Can philodendron be propagated in water?

Philodendron can certainly be propagated in water and in a few weeks, it will develop some leaves. Simply put the cutting into a glass containing water and place them in a spot where they can get indirect bright light.

How long do philodendron cuttings take to root?

It takes a few weeks for philodendron cuttings to take roots. You should begin to notice some root development in about two or three weeks. Then new leaves will begin to grow.

Do philodendrons grow better in water or soil?

Growing philodendron in either water or soil is great. Just ensure you provide the appropriate growing conditions when growing them in water or in the soil.